PRODUCT INFORMATION
QB peripheral pumps provide compact, on-demand clean-water pressure for homes, gardens and supporting equipment. Their high-head, steady-flow hydraulic design suits domestic supply, automatic irrigation, pool transfer, pipe-pressure support and general cleaning duties while remaining simple to install, operate and maintain.
ENGINEERING DETAILS
The product introduction is summarized above. This section continues with the functional design, permitted operating conditions and model-code structure.
A robust, rust-resistant brass impeller supports high-head clean-water duty.
The peripheral hydraulic design prioritizes pressure where compact dimensions matter.
Three motor sizes cover common household and garden duties from 0.37 to 0.75 kW.
Compact construction supports straightforward installation, operation and routine maintenance.
Pump clean water or liquids with similar non-aggressive physical and chemical properties.
Rated supply: single-phase 220 V / 50 Hz.
Maximum suction distance: 8 m.
Keep the motor cooling path clear and verify that the suction connection is airtight before operation.
APPLICATION FIT
Use the application and construction check below before comparing model numbers. Final selection is always made at the actual operating point.
Compact on-demand clean-water pressure for household services.
Garden sprinkling and irrigation where flow and pressure are verified.
Clean-water filling and transfer within the stated suction limit.
Pressure support for suitable cooling and utility-water systems.
MODEL SELECTION
Shortlist by flow and total head first. Motor power, connection and construction are verified after the duty point is known.
| Model | Rated supply | Power (W) | Power (HP) | Maximum head | Maximum flow | Rated head | Rated flow | Suction distance | Pipe diameter | Stator stack height | Line length |
|---|---|---|---|---|---|---|---|---|---|---|---|
| QB60 | 220 V / 50 Hz | 370 | 0.50 | 32 m | 2.0 m³/h · 33 L/min | 14 m | 1.1 m³/h · 19 L/min | 8 m | 25 mm | 50 mm | 1 m |
| QB70 | 220 V / 50 Hz | 550 | 0.75 | 50 m | 2.6 m³/h · 43 L/min | 23 m | 1.4 m³/h · 24 L/min | 8 m | 25 mm | 80 mm | 1 m |
| QB80 | 220 V / 50 Hz | 750 | 1.00 | 60 m | 3.0 m³/h · 50 L/min | 30 m | 2.2 m³/h · 37 L/min | 8 m | 25 mm | 85 mm | 1 m |
TECHNICAL LIBRARY
Switch between the complete pump and its construction view, then use the numbered parts index for identification.
The color rendering separates the hydraulic, drive, cooling and electrical groups. Use the adjacent 01–29 index as the authoritative part-number reference. Confirm model-specific service parts before ordering.
REQUEST SELECTION
Motor power alone is not enough to select a pump reliably.